by Zhang, Bin; Guo, Wanlin

The out-of-plane constraints Tz around the semi-elliptical surface cracks in an elastic plate subjected to uniform tension loading have been investigated through detailed three-dimensional (3D) finite element (FE) analyses. The distributions of Tz are obtained in the vicinity of the crack border with aspect ratios of 0.2, 0.4, 0.5, 0.6, 0.8 and 1.0. Tz drops from Poisson’s ratio at the crack tip to approximate zero beyond certain radial distance in the normal plane of the crack front line, and increases gradually from the free surface to the mid-plane at the same radial distance. By fitting the numerical results, empirical formulae are obtained to describe the 3D distributions of Tz for semi-elliptical surface cracks with a sufficient accuracy in the wide aspect ratio range of 0.2≤a/c ≤1.0 except very near the free surface, where Tz is extremely low. Tz, combining with the corresponding K and T or J and Q, can be applied to establish the three-parameter dominated stress field, which can characterize the 3D crack front field completely as an attempt.

DOI: 10.1007/s10704-004-5105-7
Print publication date: 1/1/2005
View article on SpringerLink