by Anvari, Majid; Liu, Jun; Thaulow, Christian

The application of rate-dependent cohesive elements is validated in simulation of ductile fracture in aluminum round bars under dynamic loading conditions. Smooth and notched round bars made of AA6060-T6 are tested and simulated under quasi-static and dynamic loadings. The smooth round bar is modeled using finite elements that obey Gurson–Tvergaard–Needleman (GTN) formulation as the constitutive equation. Comparing with experimental results, corresponding GTN parameters and rate-dependent plasticity of the alloy are obtained. A single strain rate-dependent GTN element with the obtained parameters is examined under different values of stress triaxiality and loading rates. The resulting stress-elongation curves represent the traction separation law (TSL) for cohesive elements and the variations of the maximum traction and the energy absorbed are investigated.The notched round bars are modeled by axisymmetric continuum and cohesive elements. The undamaged bulk material is elastic-visco plastic and the cohesive elements obey the TSL defined from the single element calculations. The experiments are simulated by these models in which the cohesive elements are rate sensitive and automatically obtain the values of the total strain rate from their adjacent continuum elements to update the values of the cohesive strength during the analysis. The results of the analysis, including maximum load, time of failure and diameter reduction are validated with the experimental results. The effects of element size, rate-dependent plasticity of the material and stress triaxiality are also discussed.

DOI: 10.1007/s10704-007-9062-9
Online Date: 5/9/2007
Print publication date: 2/1/2007
View article on SpringerLink